009.
PLUGGING IN THE STANMORE BLUETOOTH
IMPORTANT: BEFORE PROCEEDING TO POINT 001 BELOW, CHECK THE
INCLUDED POWER CORD AND PLUG AND YOUR STANMORE BLUETOOTH
ACTIVE STEREO LOUDSPEAKER ARE COMPATIBLE WITH YOUR MAINS
ELECTRICITY SUPPLY AND ASSOCIATED WALL SOCKET.
001. INSERT THE POWER CORD INTO THE POWER JACK ON THE BACK OF
THE SPEAKER.
002. CONNECT THE POWER PLUG TO THE WALL SOCKET.
003. SWITCH THE ON/OFF SWITCH TO ‘ON’ TO TURN ON THE SPEAKER.
004. THE RED BLUETOOTH INDICATOR STARTS FLASHING AS THE
SPEAKER SEARCHES FOR A BLUETOOTH DEVICE.
005. TO TURN THE SPEAKER OFF, SWITCH THE ON/OFF SWITCH TO OFF.
006. ALL INDICATORS WILL TURN OFF.
002.
001.
001. 002.
To Next Page
Loading...
Need help?
General
