Need help?Do you have a question about the Marshall Amplification VintageModern 2266C and is the answer not in the manual?
Controls the mains electric power to the amplifier.
Warms up the amplifier and prolongs valve life.
Toggles between the two dynamic ranges.
Adds a significant boost to middle frequencies.
Controls upper mid/treble frequencies for tone edge.
Parallel output jacks for connecting speaker cabinet(s).
Controls the mains electric power to the amplifier.
Warms up the amplifier and prolongs valve life.
Toggles between the two dynamic ranges.
Adds a significant boost to middle frequencies.
Controls upper mid/treble frequencies for tone edge.
Parallel output jacks for connecting speaker cabinet(s).
Power and Valves| power | 100W |
|---|---|
| valves | 4x ECC83 + 4x KT66 |
Effects Loop| FX send level | selectable -10dBV, +4dBu |
|---|
Weight and Dimensions| weight | 22.5kg |
|---|---|
| dimensions | 750 x 310 x 230 mm |
Power and Valves| power | 50W |
|---|---|
| valves | 4x ECC83 + 2x KT66 |
Effects Loop| FX send level | selectable -10dBV, +4dBu |
|---|
Weight and Dimensions| weight | 18kg |
|---|---|
| dimensions | 750 x 310 x 230 mm |
Power and Valves| power | 50W |
|---|---|
| valves | 4x ECC83 + 2x KT66 |
Effects Loop| FX send level | selectable -10dBV, +4dBu |
|---|
Weight and Dimensions| weight | 30kg |
|---|---|
| dimensions | 690 x 570 x 270 mm |
To Next Page
