Marshall Amplification Valvestate VS100R - User Manual

Valvestate
VS100R & VS102R
Combos
& VS100RH Head
Handbook
1
Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England
Tel: (01908) 375411
Fax: (01908) 376118
Web Site - http://www.marshallamps.com
Whilst the information contained herein is correct at the time of publication,
due to our policy of constant improvement and development, Marshall
Amplification plc reserve the right to alter specifications without prior notice.
Nov ‘98

Marshall Amplification Valvestate VS100R Specifications

General

Power Output	100 Watts
Technology	Valvestate
Reverb	Yes
Effects Loop	Yes
Footswitch	Yes
Speaker	1x12"
Channels	2

Summary

Front Panel Features

Input

Connect your guitar using a screened cable to prevent noise and feedback.

Volume (Clean Channel)

Controls Clean Channel volume; can provide crunch past halfway.

Bass (Clean Channel)

Adjusts low frequencies, affecting tone warmth and heaviness.

Middle (Clean Channel)

Affects sound size; increasing makes tone fatter, decreasing makes it thinner.

Treble (Clean Channel)

Adjusts high frequencies for brighter, more cutting sound.

Gain (Overdrive 1)

Controls input signal and distortion for Overdrive 1.

Volume (Overdrive 1)

Controls the volume for the Overdrive 1 channel.

Gain (Overdrive 2)

Contour (Overdrive 2)

Volume (Overdrive 2)

Bass (Overdrive EQ)

Middle (Overdrive EQ)

Treble (Overdrive EQ)

Power Dimension Switch

FX Loop Level

FX Mix

Clean Reverb

Overdrive Reverb

Rear Panel Features

Head Phone Jack

Loudspeaker Jacks

Connects external loudspeakers; specifies impedance.

Footswitch Jack

Effects Return Jack

Effects Send Jack

D.I. Jack

For recording/PA, features speaker emulation circuitry.