Martin Audio EM15 User Manual

For larger systems, the EM150 drivers can be wired externally to give a 4
ohm mono sub. Two EM150’s can now be used with an increased number of
EM15’s (see Fig 5).
Fig 5
Note: Care must be taken, when connecting EM15’s in parallel, to ensure that
the total load impedance presented to the power amplifier will not exceed the
minimum specified by the amplifier manufacturer.
8 WARRANTY
Martin Audio EM Series products are warranted against manufacturing defects
in materials or craftsmanship over a period of 5 years from the date of original
purchase. During the warranty period Martin Audio will, at it's discretion, either
repair or replace products which prove to be defective provided that the
product is returned in its original packaging, shipping prepaid, to an
authorised Martin Audio service agent or distributor.
Martin Audio Ltd. cannot be held responsible for defects caused by
unauthorised modifications, improper use, negligence, exposure to inclement
weather conditions, act of God or accident, or any use of this product that is
not in accordance with the instructions provided by Martin Audio.
Martin Audio is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
Martin Audio – EM SERIES
ENGLISH
7
INPUTS
AMP
AMP
16 ohm 16 ohm 16 ohm
16 ohm 16 ohm 16 ohm
16 ohm 16 ohm 16 ohm
16 ohm 16 ohm 16 ohm
4 ohm 4 ohm
RIGHT CHANNEL
LEFT CHANNEL
EMX1
All material © 2007. Martin Audio Ltd. Subject to change without notice.

Martin Audio EM15 Specifications

General

Brand	Martin Audio
Model	EM15
Category	Speakers
Language	English