Need help?Do you have a question about the MartinLogan Dynamo 700 and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10" (25.4cm) |
| Frequency Response | 24Hz - 200Hz |
| Amplifier Power | 300 watts RMS |
| Inputs | RCA, LFE |
| Woofer | 10-inch |
| Phase Control | 0 - 180 degrees |
Remove subwoofer from packaging and place it in a corner.
Connect signal and AC power to the subwoofer.
Adjust settings and enjoy the sound.
Adjust bass level, phase, and crossover settings for optimal sound.
Configure low pass filter and wireless connection settings.
Understand status LED and master power switch functions.
Review controls and ensure connections are tight.
Recommended setup for 2-channel systems with full-range main speakers.
Setup for home theater/multi-channel systems using LFE input.
Connect power, and instructions for replacing the fuse.
Break-in period and setup for optional wireless connection.
Guidance on optimal placement and consulting a dealer.
Tips for enjoying the setup and cabinet installation requirements.
Instructions on how to change between front-firing and down-firing orientations.
Explains room acoustics and defines acoustic terms.
Suggests using spikes for stability and improved bass.
Discusses roles and requirements of speakers in a home theater system.
Highlights the importance of subwoofers for special effects.
Answers to common queries about cleaning, interaction, and power.
Provides solutions for common operational issues.
Lists technical specs and details warranty/registration.
Outlines service policies and considerations for international use.
To Next Page
