MartinLogan MOTION SLM XL User Manual

8
speCiFiCations*
Frequency Response .....................
Dispersion ............................
Sensitivity.............................
Impedance ............................
Crossover Frequency.....................
High Frequency Driver ...................
Low Frequency Drivers ...................
Cabinet ..............................
Components ...........................
Recommended Amplifier Power.............
Binding Post Inputs ......................
Weight...............................
Dimensions with wall bracket (HxWxD) .......
MARTINLOGAN MOTION SLM XL
100–25,000 Hz ± 3 dB
80° x 80°
94 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
3,100 Hz (2-way design)
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x 4.4cm)
diaphragm.
Two 4” (10.2cm) paper cone. Four 4” (10.2cm)
paper cone passive radiators.
Sealed
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–140 watts
Push style
9 lbs. (4.1 kg)
34.1” x 6.4” x 1.89” (86.7cm x 16.2cm x 4.8cm)
*Specifications are subject to change without notice.

MartinLogan MOTION SLM XL Specifications

General

Brand	MartinLogan
Model	MOTION SLM XL
Category	Speakers
Language	English