MARUTI SUZUKI EECO User Manual

8-10
INSPECTION AND MAINTENANCE
76MH1-74E
GEAR OIL
09-60G166A
Specified Gear Oil
When replacing gear oil, use the appropri-
ate viscosity and grade as shown in the
chart below and quantity shown in the
"SPECIFICATIONS" section. We highly
recommend you use SAE 75W-90 gear oil.
(SAE 80W-90 for differential).
09-77A059A
1. Oil filler and level plug
2. Oil drain plug
Gear oil level check
The manual transmission and differentials
are lubricated with gear oil. To check the
gear oil level in of the above locations use
the following procedure:
1) Park the vehicle on a level surface with
the parking brake applied. The stop the
engine.
2) Remove the oil filler plug 1.
3) If the oil level comes upto the bottom of
the oil filler plug hole, the oil level is cor-
rect. If so, reinstall the plug.
4) If the oil level is low, add gear oil
through the oil filler plug hole 1 until the
oil level reaches the bottom of the oil
filler hole, then reinstall the plug.
Gear oil change
To change the gear oil in manual transmis-
sion or differential, use the following proce-
dure:
1) Remove the oil filler plug 1.
2) Remove the drain plug 2, drain the oil,
and reinstall the drain plug.
3) Pour new gear oil of the specified type
through the oil filler hole until the oil
level reaches the bottom of the oil filler
hole.
4) Reinstall the oil filler plug.
09-76A071A
1. Oil filler and level plug
2. Oil drain plug
API GRADE
Manual
transmission
GL-4
Differential
GL-5
(Hypoid gear oil)
75W-90
80W-90
EXAMPLE
Manual Transmission
Tightening torque ( , ):
2.4 kg-m (17.0 lb-ft)
2
21
1
EXAMPLE
1
2
EXAMPLE

MARUTI SUZUKI EECO Specifications

General

Brand	MARUTI SUZUKI
Model	EECO
Category	Automobile
Language	English