— 23 —
Air Intake Screen
Maintenance Interval
The air intake screen should be cleaned and inspected
each time Handheld Blower is used and when air flow
dropped down during operation.
Air Intake Screen Cleaning
Clean all dirt and debris from the air intake screen.
Storage
For long term storage of the Handheld Blower:
1. Empty the fuel tank into a suitable fuel storage
container approved for gasoline.
2. Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
3. Run the engine to remove any fuel that may
remain in the carburetor.
4. Perform all regular maintenance procedures and
any needed repairs.
5. Remove the spark plug and squirt a very small
amount of oil into the cylinder.
Air Intake Screen
Knob
WARNING
• Never use the handheld Blower without
the air intake screen. Before starting the
engine, check that the knob is securely
tightened and not damaged.
CAUTION
POTENTIAL HAZARD
• Oil may squirt out of the spark plug open-
ing when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
To Next Page
Loading...
