To Next PageTo Next PageWhat to do if my Maruyama M-LINE MT23L engine will not start?
If your Maruyama Trimmer engine won't start, consider these potential causes: * Ensure the STOP switch is in the 'on' position. * Check and fill the fuel tank if it's empty. * Press the primer bulb until fuel flows through the fuel return line. * If the engine is flooded, use the warm engine starting procedure.
How to fix a Maruyama M-LINE MT23L that will not idle?
If your Maruyama Trimmer will not idle, the idle speed may be set incorrectly. Set the idle speed to the correct setting.
Why does my Maruyama Trimmer engine lack power or stall when cutting?
If your Maruyama Trimmer engine lacks power or stalls while cutting, the following could be the cause: * A loose throttle wire. Solution: Tighten the throttle wire. * A dirty air filter. Solution: Clean or replace the air filter. * A clogged spark arrester or exhaust port. Solution: Clean the spark arrester or exhaust port.
General
