To Next PageTo Next PageWhat to do if my Maruyama MC2600RS engine will not start?
If your Maruyama Trimmer engine won't start, first ensure the STOP switch is in the 'on' position. Also, check the fuel tank and fill it if it's empty. If those aren't the issue, try pressing the primer bulb until you see fuel flowing through the fuel return line. Finally, the engine may be flooded, so use the warm engine starting procedure.
Why does my Maruyama Trimmer lack power or stall when cutting?
If your Maruyama Trimmer engine lacks power or stalls when cutting, check the throttle wire and tighten it if it's loose. Also, examine the air filter and clean or replace it if it's dirty.
What to do if my Maruyama Cutter engine will not start?
If your Maruyama Cutter engine won't start, several factors could be the cause. First, ensure the STOP switch is in the 'on' position. Next, check the fuel tank and fill it if it's empty. Also, make sure you've pressed the primer bulb enough times until fuel flows through the fuel return line. Finally, the engine may be flooded, in which case you should use the warm engine starting procedure.
Why does my Maruyama Cutter engine lack power or stall when cutting?
If your Maruyama Cutter engine lacks power or stalls while cutting, it could be due to a loose throttle wire; try tightening it. Another potential cause is a dirty air filter, so clean or replace the air filter.
Guidelines for safe operation by the user, covering personal protection and conduct.
Specific safety precautions related to the multi-cutter unit and its attachments.
Details specific safety and engine decals for the power unit.
Lists safety decals for the String Trimmer attachment.
Lists safety decals for the Edger attachment.
Lists key components of the power unit.
Lists key components of the String Trimmer attachment.
Lists key components of the Edger attachment.
Lists key components of the Hedge Trimmer attachment.
Lists key components of the Hedge Trimmer attachment.
Lists key components of the Pruner attachment.
Lists key components of the Cultivator attachment.
Steps for properly installing the loop handle onto the shaft.
How to install the guard for the String Trimmer attachment.
Steps for installing the trimmer head onto the attaching shaft.
Instructions for attaching the guard to the Edger.
Steps for securely fastening the edger blade.
How to attach the driveshaft tube to the Hedge Trimmer gearcase.
How to attach the driveshaft tube to the Pruner gearcase.
Steps for installing the guide bar and chain on the pruner attachment.
Instructions for attaching the driveshaft tube and shield to the cultivator gearcase.
Correct posture and grip for operating the unit with the string trimmer.
Correct posture and grip for operating the Edger attachment.
How to adjust the cutting depth for the Edger attachment.
Correct posture and grip for operating the Hedge Trimmer attachment.
Essential checks before operating the Pruner attachment.
Correct posture and grip for operating the Cultivator attachment.
General| Displacement | 25.4 cc |
|---|---|
| Starter System | Recoil |
| Engine Type | 2-stroke |
| Shaft Type | Straight |
| Handle Type | Loop |
| Power Output | 0.8 kW (1.1 hp) |
