Maruyama MC2600RS - Decals: Safety and Instruction Overview; Decals: MC2600 RS Power Unit; Decals: MC-S String Trimmer; Decals: MC-E Edger

- 4 -
7. Never operate the Multi-cutter without proper guards in place.
8. Do not put hands or feet near or under any moving parts. Keep clear at all times. Keep all parts of
your body away from the moving tool attachment and hot surfaces such as the muffler.
9. Keep a firm footing and balance. Do not overreach.
10. Use the right tool for the job. Do not use the Multi-cutter for any job that is not recommended by
MARUYAMA.
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any that are damaged or lost.
MC-HT (Hedge Trimmer Attachment)
ON SHAFT
(Part No. 221501)
ON SHAFT
(Part No. 217879)
ON SHAFT
(Part No. 221502)
ON BLADE GUIDE PLATE
(
Part No. 591450
)
CAUTION
: Extremely sharp blades. Do not touch.
ON BLADE GUARD
(Part No. 221528)
MC-S (String Trimmer Attachment)
MC-E (Edger Attachment)
MC2600RS (Multi-Cutter Power Unit)
ON ENGINE
(Part No. 267433)
N452
ON ENGINE
(Part No. 283375)
ON GEARCASE
(Part No. 223925)
Add grease to
gearcase every
10 hours of use.
ON SHAFT
(Part No. 221501)
ON SHAFT
(Part No. 221502)