To Next PageTo Next PageHow to start a Maruyama Brush Cutter if the engine won't start?
If your Maruyama Brush Cutter engine won't start, first ensure the STOP switch is in the ON position. Also, check the fuel tank and fill it if empty. Make sure you press the primer bulb until fuel flows through the fuel return line. If it still doesn't start, use the warm engine starting procedure.
What to do if Maruyama Brush Cutter engine lacks power or stalls when cutting?
If your Maruyama Brush Cutter engine lacks power or stalls while cutting, check the throttle wire and tighten it if it's loose. Also, inspect the air filter and clean or replace it if it's dirty.
Guidelines for the user to ensure safe handling and operation of the equipment.
Specific safety measures related to the brushcutter and grass trimmer functions.
Precautions for handling, storing, and using fuel safely.
Safety precautions during the operation of the brushcutter/grass trimmer.
Essential information on fuel mixing, handling, and filling the tank.
Step-by-step guide for starting a cold engine using primer and choke.
General| Displacement | 23.9 cc |
|---|---|
| Weight | 5.2 kg |
| Shaft Type | Straight |
| Starter System | Recoil |
| Engine Type | 2-stroke |
| Fuel Tank Capacity | 0.6 L |
| Power Output | 0.8 kW (1.1 hp) |
