To Next PageTo Next PageHow to start a Maruyama Brush Cutter if the engine won't start?
If your Maruyama Brush Cutter engine won't start, first ensure the STOP switch is in the ON position. Also, check the fuel tank and fill it if empty. Make sure you press the primer bulb until fuel flows through the fuel return line. If it still doesn't start, use the warm engine starting procedure.
What to do if Maruyama MX22E Brush Cutter engine lacks power or stalls when cutting?
If your Maruyama Brush Cutter engine lacks power or stalls while cutting, check the throttle wire and tighten it if it's loose. Also, inspect the air filter and clean or replace it if it's dirty.
General| Brand | Maruyama |
|---|---|
| Model | MX22E |
| Category | Brush Cutter |
| Language | English |
General safety guidelines to prevent injury and death.
Essential safety practices for the user.
Specific safety precautions for using the tool.
Step-by-step instructions for assembling the equipment.
Procedures for attaching cutting tools.
Pre-operation checks including fuel and oil.
Instructions for mixing and handling fuel and oil.
Procedures for starting and stopping the engine.
Solutions for common operational problems.
