To Next PageTo Next PageHow to start a Maruyama MX27E if the engine won't start?
If your Maruyama Brush Cutter engine won't start, first ensure the STOP switch is in the ON position. Also, check the fuel tank and fill it if empty. Make sure you press the primer bulb until fuel flows through the fuel return line. If it still doesn't start, use the warm engine starting procedure.
What to do if Maruyama MX27E engine lacks power or stalls when cutting?
If your Maruyama Brush Cutter engine lacks power or stalls while cutting, check the throttle wire and tighten it if it's loose. Also, inspect the air filter and clean or replace it if it's dirty.
General| Displacement | 25.4 cc |
|---|---|
| Fuel Tank Capacity | 0.6 L |
| Weight | 5.2 kg |
| Shaft Type | Straight |
| Starter System | Recoil |
| Vibration Level | 4.5 m/s² |
| Sound Pressure Level | 96 dB(A) |
| Engine Type | 2-stroke |
| Power Output | 0.8 kW |
Essential safety rules for the operator's personal protection.
Specific safety precautions for using the brushcutter/grass trimmer.
Critical safety measures for handling fuel.
Proper mixing and handling of oil and fuel for the engine.
Step-by-step guide to start a cold engine.
Procedure for restarting a warm engine.
How to clean and replace the air filter.
