Adjustments
MZ009_1
English
5
133
MZ009024
A
MZ009025
B
MZ009026
C
Left leg positive air adjustment:
• Unscrew and remove the dust cap (A)
• Fully tighten the pump adapter on the outside
valve (B)
• Inflate air up to the required pressure
• Fully tighten the dust cap (A)
ATTENTION
Respect the suggested pressures:
• Spring forks: see Table - Recommended
pressures for spring forks
• Air forks: see Table - Recommended
pressures for air forks
5.2 Negative air
ATTENTION
To inflate your fork, use only the special
MARZOCCHI pump with pressure gauge,
which you can buy at the authorized centers.
Use of improper tools might lead to
improper inflating and cause improper
function or damage to the fork itself.
By pressurizing air through the valve, you can
adjust the damping of the forces generated
during the REBOUND phase.
If you increase the pressure inside the fork’s leg,
you increase the rebound damping.
To do so, you need to:
• unscrew and remove the dust cap (A).
• fully tighten the pump adapter on the valve
(C), that is located in the central position.
• inflate air up to the required pressure.
• fully tighten the dust cap (A)
To Next Page
Loading...
