MAS Intercom Venus User Manual (English)

To Next Page

INTERCOM

OUTDOOR PANEL

VENUS

1. USER’S MANUAL

1.1 CALLING

In standby mode enter the Apartment number and push the button. While the call is in

progress, the panel displays “CALLING”. If you do not know the Apartment number, search

the resident name by using the and to scroll down/up in the name list then press

While the call is being directed “Calling” will be seen at the panel screen. With this note the

camera view will be visible at the Apartment to which the call is directed. Once the call is

answered “Connected” will be seen in the panel & the sides can hear other. The call will end

once the Apartment ends the call or the time set for the call is over.

1.2 BROWSING NAME LIST

If you do not know the number of the apartment you want to dial, pres (M). You can scroll up

and down with and . Once you find it, dial it on the keypad then press .

1.3 OPENING DOOR WITH COMMON PIN (SUGGESTED)

In standby mode push (C) button.”Enter the pin” will be seen at the panel screen.Enter the 4

digit pin. (C) button can be used to delete wrong entry. The door will open and “Door open”

Need help?

Do you have a question about the MAS Intercom Venus and is the answer not in the manual?

MAS Intercom Venus Specifications

General

Process of initiating a call, displaying status, and call termination.

Instructions for using a shared PIN to unlock the door.

Method for unlocking the door using an individual apartment PIN.

Customizing the initial text displayed on the panel screen.

Procedure for modifying the main door access PIN.

Restoring the system to its default factory configurations.