Left handlebar control system
1.
Cluch grip
To start the engine or make a gear shifting, press the grip to release the
drive system and cut off the clutch.
2.
Dimmer switch
When dimmer switch is turned up to " " (high beam) position, the head
light is in high beam and the high beam indicator lamp on the instrument panel
is lit. On contrary, when it is turned down to " " (low beam) position, the low
beam is lit.
3.
Turn signal switch
When the switch is turned to left " " position, the left turning signal
lamp is lit and the indicator lamp on instrument panel flashes. When the switch
is turned to right "
" position, the right turning signal lamp is lit and the
indicator lamp on instrument panel flashes.
Warning
Before turn the key to position, park the vehicle
with its side stand or central stand in a firm way.
Warning
If the handlebar is locked, the motorcycle is never pushed any
longer; otherwise you will lose balance.
To Next Page
Loading...
