To Next PageTo Next Page
Need help?Do you have a question about the Masibus MINT-DI-16 and is the answer not in the manual?
General| Brand | Masibus |
|---|---|
| Model | MINT-DI-16 |
| Category | Control Unit |
| Language | English |
General note on following instructions for safe product use.
Specifies required professional qualifications for installing, configuring, and removing modules.
Explains configuring baud rate, parity, data length, and stop bits via DIP switch or registers.
Lists registers for configuring COM1 and COM2 communication parameters like baud rate and parity.
Explains the mINT CP as a gateway for Modbus TCP to serial communication.
Covers configuration via mINT-PLUS software and IP address setup using a web browser.
Details accessing web pages to configure IP Address, Default Gateway, and Subnet Mask.
Lists Modbus addresses for configuring serial and Ethernet communication parameters.
Introduces the 16-channel digital input module with built-in counters.
Lists Modbus addresses for DI latch, status bits, and counter registers.
Details user-configurable parameters like Predefine Value and Type of Channel.
Explains setting channel output types and pulse widths for digital outputs.
Introduces the 8-channel analog output module for current or voltage signals.
