To Next PageTo Next Page
Need help?Do you have a question about the Masimo RD SET and is the answer not in the manual?
General| Brand | Masimo |
|---|---|
| Model | RD SET |
| Category | Accessories |
| Language | English |
Indicates use for continuous noninvasive monitoring and spot-checking of functional oxygen saturation and pulse rate.
Contraindicated for active patients or prolonged use; requires site inspection every four hours.
Details sensor compatibility with Masimo SET technology and verification on Nellcor devices.
Choose a well-perfused site that restricts patient movement. Clean the site before placement.
Steps for attaching the sensor to the patient's digit, including orientation and securing.
Procedure for connecting the sensor connector to the patient cable connector.
Steps to safely detach the sensor connector from the patient cable.
Wipe sensor with 70% isopropyl alcohol and allow to dry. Optional low-level disinfection.
Immersion in approved solutions (e.g., Glutaraldehyde, Bleach) for 10-24 hours.
Sensor intended for use with devices containing Masimo SET oximetry or licensed to use RD SET sensors.
Details operating temperature, storage temperature, and relative humidity.
Details limited warranty, exclusions, and liability limitations.
