9
Machine
How to charge the machine
Plug in the machine’s charging cable into the DC5V (11) machine
charging port on the function board. Connect the machine’s char-
ging cable to your own compatible DC 5V charging plug, and then
carefully insert your plug into a polarized wall outlet. Be sure to char-
ge fully before each use. The indicator light (10) will turn on to indicate
charging.
Slide the Power (12) switch towards the side labeled On to turn the
machine on.
.
How to operate the LEDs
LEDs will start automatically when the machine is turned on. Click the
LED button
LED pattern. There are 3 total options.
If the button is clicked once more after cycling through all available
LED button again to
reactivate them.
Never Miss a Note
Detailed Usage Guide
4.
[Detailed Usage Guide]
To Next Page
Loading...
