10
Microphone
How to connect the wired microphone
Gently but firmly plug the 6.5 mm AUX jack at the end of the wired
microphone into the 6.5mm AUX port (8) on the machine’s function
board.
How to install or replace the VHF microphone’s batteries
-
teries (not included) into the proper slots. Screw the covering back on,
and proceed to power on the microphone as directed above.
For both the wireless and the wired microphone, slide the power switch
up to turn the microphone on. Slide the power switch down to turn the
Note: The wireless microphone has an indicator light. If this switch is not
pushed all the way up, the indicator light will not turn on, and the mi-
How to use PA mode
When there is no music playing, this machine can be used to make
PA announcements. Simply speak into a microphone by ensuring that
it is properly connected as instructed above.
[Detailed Usage Guide]
To Next Page
Loading...
