Certa 800 Pump User Manual
m-certa800-en-01 1
Contents
1 Declaration of conformity 3
2 Warranty 4
3 Intended use 4
4 How to handle stainless steel and other materials 5
5 Information for returning pumps 5
6 When you unpack your pump 5
7 Environment and disposal of waste 6
8 Sinusoidal pumps - an overview 6
9 Safety notes 6
9.1 Obligation of the operating organisation 6
9.2 Organisational measures 6
9.3 Obligation of the operators 7
9.4 Personnel training 7
9.5 Safety measures 7
9.6 Dangers when handling the machine 7
9.7 Safety measures in normal operation 7
9.8 Protective devices 7
9.9 Dangers due to hazardous pumped material 7
9.10 Dangers due to electrical energy 7
9.11 Dangers due to hydraulic energy 7
9.12 Special danger points 7
9.13 Constructional changes to the machine 8
9.14 Noise 8
9.15 Limit values for the pump 9
9.16 Maintenance and repair 9
9.17 Cleaning the pump 10
9.18 Faults 10
10 Pump specifications 11
10.1 Standards 11
10.2 Dimensions 11
Dimensions in millimetres: 11
Dimensions in inches: 11
10.3 Unit weights 11
11 Transport 12
12 Good pump installation practice 13
12.1 Dos and don'ts 13
12.2 Connection to the piping 14
12.3 Cavitation 15
12.4 Possible pump orientations 16
12.5 Connecting to a power supply 16
13 Start-up and operation 17
14 Flushing the seal system 18
14.1 Dynamic flushing 18
14.2 Static flushing device 19
To Next Page
Need help?
General
