Certa Compact Pump User Manual
m-certa-compact-en-01 1
Contents
1 Warranty 4
2 Intended use 4
3 How to handle stainless steel and other materials 5
4 Information for returning pumps 5
5 Environment and disposal of waste 5
6 When you unpack your pump 6
7 Sinusoidal pumps - an overview 6
8 Safety notes 6
8.1 Obligation of the operating organisation 7
8.2 Organisational measures 7
8.3 Obligation of the operators 7
8.4 Personnel training 7
8.5 Safety measures 7
8.6 Dangers when handling the machine 7
8.7 Safety measures in normal operation 7
8.8 Protective devices 7
8.9 Dangers due to hazardous pumped material 7
8.10 Dangers due to electrical energy 7
8.11 Dangers due to hydraulic energy 8
8.12 Special danger points 8
8.13 Constructional changes to the machine 8
8.14 Noise 8
8.15 Limit values for the pump 9
8.16 Maintenance and repair 9
8.17 Cleaning the pump 10
8.18 Faults 10
9 Pump specifications 10
9.1 Standards 10
9.2 Dimensions 11
Dimensions in millimetres: 11
Dimensions in inches: 11
9.3 Unit weights 12
10 Transport 13
11 Good pump installation practice 14
11.1 Dos and don'ts 14
11.2 Connection to the piping 14
11.3 Cavitation 16
11.4 Possible pump orientations 17
11.5 Connecting to a power supply 17
12 Start-up and operation 18
13 Flushing the seal system 19
13.1 Dynamic flushing 19
13.2 Static flushing device 19
13.3 Fitting a flush ring 20
To Next Page
Need help?
General
