Certa Pump User Manual
m-certa-en-08 1
Contents
1 Declaration of conformity 3
2 Warranty 4
3 Intended use 4
4 How to handle stainless steel and other materials 5
5 Information for returning pumps 5
6 Environment and disposal of waste 5
7 When you unpack your pump 6
8 Sinusoidal pumps - an overview 6
9 Safety notes 6
9.1 Obligation of the operating organisation 7
9.2 Organisational measures 7
9.3 Obligation of the operators 7
9.4 Personnel training 7
9.5 Safety measures 7
9.6 Dangers when handling the machine 7
9.7 Safety measures in normal operation 7
9.8 Protective devices 7
9.9 Dangers due to hazardous pumped material 7
9.10 Dangers due to electrical energy 7
9.11 Dangers due to hydraulic energy 7
9.12 Special danger points 8
9.13 Constructional changes to the machine 8
9.14 Noise 8
9.15 Limit values for the pump 9
9.16 Maintenance and repair 9
9.17 Cleaning the pump 10
9.18 Faults 10
10 Pump specifications 11
10.1 Standards 11
10.2 Dimensions 12
Dimensions in millimetres: 12
Dimensions in inches: 12
10.3 Unit weights 13
11 Transport 14
12 Good pump installation practice 15
12.1 Dos and don'ts 15
12.2 Connection to the piping 16
12.3 Cavitation 17
12.4 Possible pump orientations 18
12.5 Connecting to a power supply 18
13 Start-up and operation 19
14 Flushing the seal system 20
14.1 Dynamic flushing 20
14.2 Static flushing device 21
To Next Page
Need help?
General
