14.3 Fitting a flush ring 21
15 Cleaning and sterilisation 22
16 Changing the oil 24
17 Heating and cooling option 25
18 Troubleshooting 26
18.1 Rework of front and back cover 26
18.2 Technical support 26
19 Disassembly and assembly 27
19.1 Disassembling the pump 27
19.2 Disassembling the mechanical seal system 30
19.3 Disassembling the middle housing 31
19.4 Disassembling the support / Changing the nozzle orientation 31
19.5 Assembling the support / Centering the rotor with the shim ring 32
19.6 Checking the X-Dimension 33
19.7 Assembling the front mechanical seal 33
19.8 Assembling the pump head 35
19.9 Assembling the flush ring of a single mechanical seal system 38
19.10 Assembling the back seal in a double mechanical seal system 38
20 Tightening torques 42
21 Parts lists 44
21.1 Rotor types 44
21.2 Pumps 45
21.3 Single mechanical seal 53
21.4 Flush ring 54
21.5 Atmospheric side of double mechanical seal 56
21.6 Static flush system 58
21.7 Dynamic flush system 60
21.8 Tools 61
22 Trademarks 62
23 Disclaimers 62
24 Publication history 62
2 m-certa-en-08
To Next Page
Loading...
