Indicator Washer:
All pumps that are fitted with a valve are supplied with an Indicator Washer. The Indicator washer
secures the valve handle and shows the direction to turn the handle for pressure or vacuum
operation. The Indicator Washer is reversible allowing the washer to be orientated to your specific
setup and plumbing configuration.
Warning! The installation of the Handle Indicator Washer is the responsibility of the
installer. Incorrect orientation of the Handle Indicator Washer may result in unexpected
vacuum or pressure that may result in machinery failure, bodily injury or even death.
Hose:
vacuum and 25 PSI pressure, and
withstand air/oil temperatures up to 300 F. Hot-tar and asphalt hose is designed for use in this of
environment.
To Next Page
Loading...
Need help?
General
