Need help?Do you have a question about the Mass W200 and is the answer not in the manual?
Detailed steps for safely removing the MASS W200 subwoofer from its packaging, including handling precautions.
Guidance on placing the subwoofer, ensuring cables are adequate, and crucial safety advice before setup.
Recommended starting points for Volume, Frequency, Phase, Mode, and 12v Trigger controls for initial setup.
Steps for connecting cables, setting controls, and powering on the subwoofer for initial use.
Details RCA Stereo and LFE inputs, and the 12 Volt Trigger input for power control.
Explanation of Crossover Frequency and Volume controls for sound adjustment.
Description of Bass, Phase Control, and Mode switches for sound tailoring.
Details Power Mode switch, Mains Power switch, and the power connector.
Details system format, amplifier output, classification, and input requirements.
Lists driver compliment, impedance, connection types, and physical dimensions.
Specifies power consumption in operational and standby modes, and unpacked weight.
Troubleshooting steps for power issues, including LED status, lead connections, and trigger input.
Diagnostic steps for no audio output, checking LED status, signal leads, and volume levels.
To Next Page
General