Mass W200 - Specifications; System and Amplifier Specifications; Driver, Connections, and Dimensions; Power Consumption and Weight

To Next Page

To Previous Page

monitoraudio.com 5

Speciﬁcation

System Format :- Active sub-woofer system – Auxiliary (ABR) loading.

18mm MDF cabinet (CARB2 approved)

Low Frequency Limit :- 30Hz (-6dB)

Upper Frequency Limit :- Variable 40 – 120 Hz @ 24dB/Octave

Ampliﬁer Power Output :- 220 Watts @ 1% THD+N

Ampliﬁer Classiﬁcation :- Class D ampliﬁer with Switch mode power supply (SMPSU)

Bass EQ Switch :- Music/ Movie/ Impact

Phase Control :- 0-180 degrees

Auto Sensing :- Line Level >3.5mV

Input Level Requirements :- Standby after approximately 20 minutes if no signal sensed

Driver Compliment :- 1 x 10” (250mm) C-CAM

long throw driver

1 x 10” (260mm) Auxiliary bass radiator

Input Impedance :- > 20K Ohms

Mains Input Voltage :- 100 - 120 Vac / 220 - 240 Vac 50/60Hz

(Factory Region Preset)

Dimensions :- 420 x 385 x 385mm (H x W x D)

(Including grilles & feet) 16

9/16

x 15

3/16

x 15

3/16

Inch (H x W x D)

Connections :- Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-

jack)

12v Trigger Input :- 5 - 12v via 3.5mm mono mini-jack socket

Power Consumption :- 200 Watts / 0.5 Watts in Standby (ErP approved)

Weight (unpacked) :- 15.96Kg (35lb 2oz)

ENGLISH