EasyManua.ls Logo

Mass W200 - Troubleshooting; Subwoofer Power Issues; No Sound Output Issues

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MASS W2006
Trouble Shooting
Should you experience any technical, or set-up problems with your subwoofer please check the
Trouble Shooting Guide below:
My subwoofer will not turn on/ no power.
• IstheLEDilluminatedonthetopoftheunit?Ifnot,thencheckyourmainsleadis
properly connected both at the subwoofer and at the mains outlet. Also check the fuse
of the mains plug (where fitted).
• IstheLEDred?Ifso,youhavepowergoingtotheunit.Itcouldbethatthereisno
signal, or the 12v trigger is connected and the source not turned on (see below).
• Haveyougotthe12vtriggerconnected?Ifso,thesubwooferwillnotpowerupuntilthe
source is powered up.
• Istheunitreceivingasignal(12vtriggernotbeingused)?IsthePowerModeSwitchin
AutoorOnposition,andsignalsourceturnedon?Tryadjustingthevolumelevelofthe
source.
If it still does not turn on/ power up, please contact your local dealer/ distributor or Monitor Audio
immediately.
No sound from subwoofer.
• IstheLEDonthetopredorgreen?Ifitisred,thentheunithasn’tactuallyturnedon.
See above suggestions. If it is green, then your unit is powered up and turned on.
Check further suggestions below.
• Arethesignalleadsconnectedcorrectly?Checkthese.Ifpossible,checkbyreplacing
with a second, working set.
• Isthevolumeleveljustverylow?Tryturningthevolumeonthesourceupabitmore.
If it still does not output a signal, please contact your local dealer/ distributor or Monitor Audio
immediately.