Safety Notes
4200 cab - M2
WEO
6
Safety Alert Symbol and Terms
This safety alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
The safety alert symbol identifies important safety messages on machines, safety signs, in manuals, or elsewhere.
When you see this symbol, be alert to the possibility of personal injury or death.
Follow the instructions in the safety message.
Why is SAFETY important to you?
★
ACCIDENTS DISABLE and KILL
★
★
ACCIDENTS are COSTLY
★
★
ACCIDENTS can be AVOIDED
★
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tractor and Implement Safety
The tractor is a source of power - Mechanical and Hydraulic.
On its own, the tractor is of little practical value. Only when used in conjunction with an implement or other attachment
does it become a working unit.
This instruction book is compiled to cover those safe working practices that are associated with the base tractor
operation.
It does not cover all operation and safety instructions relevant to all known implements and attachments that may be
fitted at the time of tractor delivery or at some future date.
It is essential that operators use and understand the relevant instruction manual of such implements and attachments.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Introduction to Safety
This safety section of your Operator Instruction Book is
intended to point out some of the basic safety situations
which may be encountered during the normal operation
and maintenance of your
FOOTSTEP (ROPS)
or
CAB
tractor, and to suggest possible ways of dealing with
these situations. This section is
NOT
a replacement for
other safety practices featured in other sections of this
book.
Additional precautions may be necessary, depending on
attachments used and conditions at the work site or in
the service area. Massey Ferguson has no direct control
over tractor application, operation, inspection, lubrication,
or maintenance. Therefore it is
YOUR
responsibility to
use good safety practices in these areas.
A Word to the Operator
It is
YOUR
responsibility to read and understand the
safety section in this book before operating your tractor.
You must follow these safety instructions that take you
step by step through your working day.
In reading this section, you will note that illustrations
have been used to highlight certain situations. Each
illustration is numbered and the same number appears in
the text in parenthesis. This number is placed at the end
of the written text that refers to the illustration.
Remember that
YOU
are the key to safety. Good safety
practices not only protect you, but also the people
around you. Study the features in this manual and make
them a working part of your safety programme. Keep in
mind that this safety section is written only for this type
of machine. Practice all other usual and customary safe
working precautions, and above all
- REMEMBER -
SAFETY IS YOUR RESPONSIBILITY. YOU CAN
PREVENT SERIOUS INJURY OR DEATH.
Use only AGCO - Massey Ferguson approved
attachments and equipment.
Find manuals at https://best-manuals.com
To Next Page
Loading...
