MASSEY FERGUSON 6455 User Manual

AGCO S.A. All rights reserved Beauvais France March 2006
Massey Ferguson 6400
Workshop service manual
n° 3378405M4
CONTENTS
01 - Introduction - Specifications
02 - Splitting the tractor
03 - Engine
05 - Gearbox
06 - Rear axle
07 - Power take off
08 - Front axle
09 - Hydraulics
10 - Electrical equipment
11 - Electronics
12 - Cab and equipment
13 - Accessories
H

MASSEY FERGUSON 6455 Specifications

General

PTO Power	85 hp
Hydraulic System	Open center
Gears	16 forward, 16 reverse
PTO Speed	540/1000
Engine Type	Perkins 1104D-44T
Transmission	Dyna-4

Summary

SPECIFICATIONS - General specifications

A. Model 6445

General specifications for Massey Ferguson Model 6445.

B. Model 6455

C. Model 6460

D. Model 6465

E. Model 6470

F. Model 6475

G. Model 6480

H. Model 6485

I. Model 6490

J. Model 6495

K. Model 6497

L. Model 6499

02A01 - Splitting - Front frame / Perkins engine

D. Shimming the front frame (Perkins 4-cylinder EEM engine)

02A02 - Splitting - Front frame / Sisu engine

B. Disassembling

Procedure for disassembling the front frame and Sisu engine.

C. Reassembling

Procedure for reassembling the front frame and Sisu engine.

2A30 - Splitting the front frame/Sisu engine - MF 6497-6499

02B01 - Splitting - Perkins Engine / GBA20 Gearbox

B. Disassembling and reassembling (Perkins 6-cylinder engine)

Procedure for splitting/reassembling Perkins 6-cyl engine and GBA20 gearbox.

C. Disassembling and reassembling (Perkins 4-cylinder engine)

Procedure for splitting/reassembling Perkins 4-cyl engine and GBA20 gearbox.

2B11 - Perkins/GTA2520 engine separation

B. Disassembling and reassembling (six-cylinder Perkins engine)

Procedure for separating/reassembling six-cyl Perkins engine with GTA2520.

C. Disassembling and reassembling (four-cylinder Perkins engine)

Procedure for separating/reassembling four-cyl Perkins engine with GTA2520.

02B02 - Splitting – Sisu Engine / GBA10 Gearbox

2B21 - Splitting the Sisu engine/GTA1030

B. Disassembly

Procedure for disassembling Sisu engine from GTA1030.

C. Reassembly

Procedure for reassembling Sisu engine with GTA1030.

02C01 - Splitting - GBA20 gearbox / Centre housing

02C02 - Splitting - GBA10 gearbox / Centre housing

B. Disassembling and reassembling with the cab fixed to the centre housing

Procedure for disassembly/reassembly with cab fixed to centre housing.

2C30 - GBA25/GPA20 separation

B. Disassembly and reassembly with the cab fixed to the centre housing

Procedure for disassembly/reassembly with cab fixed to centre housing.

C. Disassembling and reassembling with the cab fixed to the gearbox

Procedure for disassembly/reassembly with cab fixed to gearbox.