MASSEY FERGUSON 6400 - User Manual

AGCO S.A. All rights reserved Beauvais France March 2006
Massey Ferguson 6400
Workshop service manual
n° 3378405M4
CONTENTS
01 - Introduction - Specifications
02 - Splitting the tractor
03 - Engine
05 - Gearbox
06 - Rear axle
07 - Power take off
08 - Front axle
09 - Hydraulics
10 - Electrical equipment
11 - Electronics
12 - Cab and equipment
13 - Accessories
H

MASSEY FERGUSON 6400 Specifications

General

Fuel Type	Diesel
Engine Type	Perkins
Transmission	Dyna-6
Drive	4WD
Hydraulic Flow	Up to 110 L/min

Summary

01 - Introduction - Specifications

1 A10 - Using the manual

Guidance on how to effectively use the workshop service manual.

1 B10 - SPECIFICATIONS - General specifications

Detailed general specifications for various Massey Ferguson 6400 models.

1 B11 - SPECIFICATIONS - Ground speeds

Specifications for ground speeds across different models and configurations.

1 B12 - SPECIFICATIONS - Dimensions

Physical dimensions for various models, including track width and attachment points.

1 B13 - SPECIFICATIONS - Capacities

Specifications for fluid capacities like engine oil, transmission oil, and fuel.

1 C10 - Miscellaneous

Contains miscellaneous information such as conversion tables, compounds, and torques.

02 - Splitting the tractor

02 A01 - Splitting - Front frame; Perkins engine

Procedure for splitting the front frame from the Perkins engine.

02 A02 - Splitting - Front frame; Sisu engine

Procedure for splitting the front frame from the Sisu engine.

2 A30 - Splitting the front frame;Sisu engine - MF 6497-6499

Procedure for splitting the front frame on specific Sisu engine models.

02 B01 - Splitting - Perkins Engine; GBA20 Gearbox

Procedure for splitting Perkins engines from GBA20 gearboxes.

2 B11 - Perkins;GTA2520 engine separation

Procedure for separating Perkins/GTA2520 engines from gearboxes.

02 B02 - Splitting - Sisu Engine; GBA10 Gearbox

Procedure for splitting Sisu engines from GBA10 gearboxes.

2 B21 - Splitting the Sisu engine;GTA1030

Procedure for splitting Sisu engines from GTA1030 gearboxes.

02 C01 - Splitting - GBA20 gearbox; Centre housing

Procedure for splitting GBA20 gearboxes from centre housings.

02 C02 - Splitting - GBA10 gearbox; Centre housing

Procedure for splitting GBA10 gearboxes from centre housings.

2 C30 - GBA25;GPA20 separation

Procedure for separating GBA25 and GPA20 gearboxes/housings.