MASSEY FERGUSON 6400 - A. General

Massey Ferguson 6400 - Issue 4.a
2B21.3
Splitting the Sisu engine/GTA1030
A . General
Engine/GBA 10 gearbox splitting is to be carried out
while maintaining the cab integral with the rear axle.
This operation is needed when access to the following
main elements is required for servicing:
• Engine interface :
- vibration damper,
- engine flywheel,
- engine adapter plate;
• Gearbox interface :
- spacer, cover and sealing ring,
- hydraulic pipes internal to the spacer,
- PowerShuttle and Dynashift.
I
MPORTANT: This section presents a general disas-
sembly procedure. Before and during disassembly,
check that all connections have been properly sepa-
rated between the fixed assembly and mobile
assembly.
¤
H