To Next PageTo Next Page
Need help?Do you have a question about the MASSEY FERGUSON 6495 and is the answer not in the manual?
General| Transmission | Dyna-6 |
|---|---|
| PTO Power | 130 hp |
| Fuel Type | Diesel |
| PTO HP | 130 hp |
| Gears | 24 forward and 24 reverse |
| PTO Speed | 540/1000 rpm |
| Fuel Capacity | 320 liters |
| Hydraulic System | Closed center, load sensing |
| Hydraulic Pump Flow | 110 lpm |
| Fuel Tank Capacity | 320 liters |
| Engine Type (alternative) | 4-cylinder turbocharged diesel |
| Hydraulic System (alternative) | Closed center, load sensing |
| Weight (alternative) | 6, 500 kg |
General information and repair guidelines for effective manual usage.
Detailed technical specifications for various Massey Ferguson 6400 tractor models and variants.
Ground speed specifications for different tractor models and tire configurations.
Technical dimensions, including track width and attachment points for tractor models.
Fluid capacities for engine, transmission, hydraulics, fuel, and other systems.
Supporting information including conversion tables, products, and tightening torques.
Procedure for separating the tractor's front frame from the Perkins engine.
Procedure for separating the tractor's front frame from the Sisu engine.
Procedure for splitting the front frame and Sisu engine for MF 6497-6499 models.
Procedure for separating the Perkins engine from the GBA20 gearbox assembly.
Procedure for separating the Perkins/GTA2520 engine from the gearbox assembly.
Procedure for splitting the Sisu engine from the GBA10 gearbox assembly.
Procedure for splitting the Sisu engine from the GTA1030 gearbox assembly.
Procedure for splitting the GBA20 gearbox from the centre housing assembly.
Procedure for splitting the GBA10 gearbox from the centre housing assembly.
Procedure for separating the GBA25 and GPA20 gearboxes or housings.
