MASSEY FERGUSON 6490 User Manual

AGCO S.A. All rights reserved Beauvais France March 2006
Massey Ferguson 6400
Workshop service manual
n° 3378405M4
CONTENTS
01 - Introduction - Specifications
02 - Splitting the tractor
03 - Engine
05 - Gearbox
06 - Rear axle
07 - Power take off
08 - Front axle
09 - Hydraulics
10 - Electrical equipment
11 - Electronics
12 - Cab and equipment
13 - Accessories
H

MASSEY FERGUSON 6490 Specifications

General

Transmission	Dyna-6
Engine Cylinders	6
Fuel Type	Diesel
PTO Horsepower	130 hp
Transmission Type	Semi-Powershift
Gears	24 Forward and 24 Reverse
PTO Speed	540/1000 RPM
Type	Tractor
Hydraulic System	Closed center
Engine Type	Diesel

Summary

Introduction and Specifications

Using the Manual

Instructions and guidance on how to effectively use the service manual.

General Specifications

Comprehensive technical specifications covering various models and configurations.

Ground Speeds Specifications

Detailed information on ground speeds for different tractor models and tire configurations.

Dimensions Specifications

Specifications detailing physical dimensions and track width adjustments.

Tractor Splitting Procedures

Splitting Front Frame - Perkins Engine

Procedure for splitting the front frame from the Perkins engine.

Splitting Perkins Engine / GBA20 Gearbox

Procedure for separating the Perkins engine from the GBA20 gearbox.

Splitting Sisu Engine / GBA10 Gearbox

Procedure for separating the Sisu engine from the GBA10 gearbox.

Splitting GBA20 Gearbox / Centre Housing

Procedure for splitting the GBA20 gearbox from the centre housing.