Massey Ferguson 6400 - Issue 4.b
1A10.3
Using the manual
A . General
The purpose of this manual is to assist Dealers and
Agents in the efficient installation, maintenance and
repair of AGCO equipment. Carrying out the proce-
dures as detailed, together with the use of special
tools where appropriate, will enable the operations to
be completed within the time stated in the Repair Time
Schedule.
B . Structure of the manual
Page numbering
The present manual is divided into chapters and
sections, and each page is numbered with the
following information:
Example: 10A12.1
10 = Chapter
A12 = Section
1 = Page number within the section
The issue number is indicated at the bottom of the
page.
Contents
For quick reference, each chapter starts with a table of
contents, listing the various sections included in that
chapter.
Meaning of references
(..) : identification of parts and components
Amendments
Amended pages will be issued carrying the same page
number as the former pages: only the version number
will change.
Former pages should be destroyed.
C . Service tools
Where the use of a service tool is necessary to carry
out an operation, the tool reference is mentioned
following the relevant instruction.
Drawings for locally made tools are given at the end of
the relevant sections.
D . Repairs and replacements
When parts have to be replaced, it is essential that only
genuine AGCO parts are used.
The following points are of particular importance when
carrying out repairs and fitting replacement parts and
accessories.
Tractor safety features may be impaired if non-genuine
parts are fitted.
Legislation in certain countries prohibits the fitting of
parts that do not comply with the tractor manufac-
turer’s specifications. Torque wrench setting figures
given in the Workshop Service Manual must be strictly
adhered to. Locking devices must be fitted where
specified. If the efficiency of a locking device is
impaired during removal, it must be replaced.
The tractor warranty may be invalidated if non-genuine
AGCO parts are fitted. All AGCO spare parts have the
full backing of the manufacturer’s warranty. AGCO
Dealers and Agents are required to supply only
genuine service parts.
To Next Page
Loading...