Massey Ferguson 6400 - Issue 1
02C02.8
Splitting - GBA10 gearbox / Centre housing
37. Couple the gearbox to the centre housing.
Reminder
If there is resistance when moving the elements
(gearbox, centre housing) together, do not force
them, and find the cause of the problem.
38. When the elements are assembled, remove the
guide studs. Position the screws according to the
marks made when removed and tighten to a
torque of: (Fig. 3)
- Screws (1): 240 - 320 Nm
- Screws (5): 220 - 280 Nm
- Screws (6): 240 - 320 Nm
- Nuts (3): 300 - 400 Nm
Fig. 7
To Next Page
Loading...