4-10
WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 4WD-LOCK (“DIFF.LOCK”), or
vice-versa while the vehicle is moving .
WHAT CAN HAPPEN
The vehicle handles differently in 2WD
than in 4WD and in 4WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 4WD to 4WD–LOCK, or
vice-versa while moving may cause the
vehicle to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the vehicle before chang-
ing from 2WD to 4WD or from 4WDto
4WD –LOCK, or vice-versa.
On-Command four-wheel-drive switch
“2WD/4WD”
1. Select lever
2. On-Command four –wheel-drive switch “2WD/4WD”
To change from 2WD to 4WD ,stop the
vehicle, and then set the switch to
“4WD”.When the vehicle is in 4WD, the
4WD indicator “ ”will come on in the
multi-function meter unit display .To change
from 4WD to 2WD .stop the vehicle ,be sure
the select lever is set to position , and
then set the switch to “2WD”.
To Next Page
Loading...
