4-11
On-Command differential gear lock
switch “4WD”/”LOCK”
1. On-Command differential gear lock switch “4WD”/ “LOCK”
2. Select lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to “4WD”,move
the select lever to position ,and then set
the switch to “LOCK”. When the differential
gear is locked, the differential gear lock
indicator light (“DIFF. LOCK”) will come on
along with the differential gear lock indicator
“ ”in the multifunction meter unit display .To
release the differential gear lock , stop the
vehicle and set the switch to “4WD”.
WARNING
POTENTIAL HAZARD
Riding too fast while the vehicle is in
4WD-LOCK.
WHAT CAN HAPPEN
All wheels turn at the same speed when
the differential is locked, so it takes
more effort to turn the vehicle. The
amount of effort required is greater the
faster you go. You may lose control and
have an accident if you cannot make a
sharp enough turn for the speed you
are traveling.
HOW TO AVOID THE HAZARD
Always ride at a slow speed when the
vehicle is in 4WD-LOCK, and allow
extra time and distance for maneuvers.
To Next Page
Loading...
