4-11 Control Functions
On-Command Four-Wheel–Drive and
Differential Gear Lock Switches
1. On-Command four-wheel –drive switch “2WD”/ “4 WD”
2. Differential gear lock switch “LOCK”/ “2WD”
This vehicle is equipped with an
On-Command
four–wheel-drive switch “2WD”/ “4WD”and a
differential gear lock switch “4WD”/ “LOCK”.
Select the appropriate drive according to
terrain and the conditions.
z Two-wheel drive (”2WD”): Power is sup-
plied to the rear wheels only.
z Four-wheel drive (“4WD”): Power is
supplied to the rear and front wheels.
z Four–wheel drive with the differential
gear locked (“4WD-LOCK”): Power is
supplied to the rear and front wheels
when the differential gear is locked.
Unlike the 4WD mode, all wheels turn at
the same speed regardless of traction.
To Next Page
Loading...
