4-13 Control Functions
To change from 4WD to 2WD
Stop the vehicle, and then set the switch to
“2WD”。The 4WD indicator will go out in the
multi-function display.
On-Command Differential Gear Lock
Switch “2WD/LOCK”
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to “4WD”,
move the select lever to position
, and then
set the switch to “LOCK”.
1. On-Command differential lock switch “4WD/LOCK”
2. Select lever
When the differential gear is locked, the
differential gear lock indicator light will come
on along with the differential gear lock
indicator in the multifunction meter unit
display. To release the differential gear lock,
stop the vehicle and set the switch to “4WD”.
To Next Page
Loading...
