09
3. Specifications
3.1.1 Auto range and manual range.
3.1.2 Overrange protection is provided for all ranges.
3.1.3 Maximum voltage between terminals and earth
ground: 600V DC or 600V rms AC
3.1.4 Operating altitude: max. 2000 meters (7000 ft.)
3.1.5 Display: 4000 counts with analog bar LCD display
3.1.6 Maximum value display: 4000 digits
3.1.7 Polarity indication: automatic; '-' for negative
polarity.
3.1.8 Overrange indication: '0L' or '-0L'
3.1.9 Converter Rate: 3 times/sec; Bar graph:
30 times/sec.
3.1.10 Unit indication: function and unit.
3.1.11 Auto power off time: 15 minute.
3.1.12 Operating power : 1.5V×3 AAA batteries
3.1.13 Battery low indication: ' ' on LCD
3.1.14 Temperature factor: < 0.1×Accuracy /°C
3.1.15 Operating temperature: 0°C to 40°C
(32°F to 104°F)
3.1.16 Storage temperature: -10°C to 50°C
(10°F to 122°F)
3.1.17 Dimension: 225×86×33mm
3.1.18 Weight: approximate 320g(including batteries)
Calibration is required once a year, to be carried out at a
temperature between 18°C and 28 °C (64°F to 82°F) and
relative humidity below 75%.
3.1 General Specifications
To Next Page
Loading...
