MAINTENANCE
It is important to periodically clean the ear tips and bodies of
Master & Dynamic earphones, as well as the acoustic filter found
at the end of each earphone body. Doing so will help ensure
consistent audio performance. Even small amounts of debris,
dirt and wax can dramatically reduce or eliminate sound output.
To clean the acoustic filter, follow these steps:
Remove the tips from the
earphone bodies;
Remove acoustic filter by
turning counter clockwise;
Fully submerge acoustic
filter in hydrogen peroxide
for a few minutes to allow
the debris, dirt or wax to
loosen;
Apply hydrogen peroxide to a
clean cotton swab or soft cloth
to gently scrub the acoustic
mesh. Let dry completely;
To clean the ear tips, wipe using
mild soap or isopropyl alcohol.
1
2
3
4
5
To Next Page
Loading...
