7
PAIRING TO 2 DEVICES
1. Enter pairing mode and connect to device 1.
2. Enter pairing mode again and connect to device 2. Device 1 will disconnect.
3. Power OFF Headphones
4. Turn headphones on and headphones will automatically connect to device 1
and 2 simultaneously.
5. Pause one device and play from the other to swap headphones connection.
MAINTENANCE / CARE
Clean ear pads and headphones with a soft, slightly damp cloth. Do not
soak, submerge, or allow moisture to enter near the drivers or cable jacks.
Replacement ear pads and cables can be purchased at:
www.masterdynamic.com
Do not drop, sit on, or allow the headphones to be exposed to water, moisture,
or extreme temperature.
It is recommended that you return your headphones to their storage pouch
when not in use. To avoid damage, do not store other items in the headphone
pouch along with your headphones. CAUTION: Incorrectly rotating or over
rotating the ear cups can damage the headphones.
TEMPERATURE RANGE
Operate and store this product within the temperature range of -4°F to
113°F (-20°C to 45°C) only. Charge the battery where the temperature is
between 41°F and 104°F (5°C and 40°C) only.
To Next Page
Loading...
