Master Audio
DSP206-608. Version 1.2 Apr 14 17
5.3.3 Access Level – Lock the front panel through a password
To lock the system, turn the rotary knob until the word “Locked” is displayed. The
system will prompt for a password.
The password may be up to 8 characters long. When entering shorter passwords,
use the Menu key to finish and confirm. Use the Exit key to go back and make the
password shorter.
WARNING: If blank spaces are included in the password, they will be stored and
must be entered in the same position in order to unlock the device.
NOTE: The factory default password is “Password”
After that the system will be LOCKED and only the Mute buttons and the Menu key
will be active.
To UNLOCK the device, proceed with the following steps:
Press the menu key. The Lock screen will appear. Turn the rotary knob
counterclokwise to select “Unlocked”
Then enter the password. Click enter to finish.
5.3.4 Version Info – Shows the device software and hardware information. Turn the
rotary knob to display the information available:
To Next Page
Loading...