Master Bilt SPT-28 - Basic Operation

SPT-28, SPT-48, SPT-72
UC-28SR, UC-48DR, UC-72TR
1. The controller(thermostat) is located at the top inside of the unit.
2. The factory setting for the control is ‘Normal’.
3. Setting toward “Cool” for higher temperature and “Cold” for lower temperature.
4. The thermostat controls compressor’s on/off by sensing inside temperature.
7
Master bilt
BASIC OPERATION
COLD
OFF
NORMAL
COOL
UC-28SR
COLD
OFF
NORMAL
COOL
UC-48DR
COLD
OFF
NORMAL
COOL
SPT-28
COLD
OFF
NORMAL
COOL
SPT-48
COLD
OFF
NORMAL
COOL
UC-72TR
SPT-72
SPT-24,48,72/UC-28SR,48DR,(영) 2003.1.13 9:58 AM 페이지7