5
Important Notes
TM TM
Induction Cooker
On/Off Button
with indicator light
Adjustment
Buttons
(- and +)
Timer
Button
Display
Window
Timer
Symbol
Lock
Symbol
Timer Cooking Level
Indicator Lights
Description of Parts
1. This Induction Cooktop will only operate with suitable cookware.
The most common types are cast iron, enameled and stainless steel. The Induction Cooktop will not operate
when using aluminum, ceramic, copper, glass and Pyrex
©
or cookware that has a concave bottom.
2. If the Induction Cooktop has been turned on without a compatible pot in place, the unit will beep for
approximately 30 seconds and the error code E1 will be appear in the Display Window. Then the unit will shut off
automatically.
3. The unit will automatically turn off if the voltage rises over 150 V or drops to less than 80 V.
4. When the unit is off, the fan may continue running until the temperature of the Induction Cooktop is below
120°F (50°C).
5. NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware and/or cause the unit
to shut off.
NOTE: Cookware should have a diameter no less than 10 cm (4”) or more than 25 cm (10”) in
order to work correctly. If the cookware is larger than the circular cookware placement guides
indicated on the Induction Cooktop, the area outside these guides will not work causing an
inconsistent heating pattern.
To Next Page
Loading...
Need help?
General
