Product No. 043-1018-2 | Contact us: 1-855-803-9313
8
Error Code
(see digital display)
Reason Solution(s)
E0, E2, E5, E6 Internal Circuit Error
Parts are either overheating or
have an open or short circuit
• See 'Warranty' section
in this instruction booklet
for contact information.
E1 Cookware Sensor Detection • Check whether or not
cookware is suitable.
• Make sure the
cookware is within
the circular cookware
placement guides
indicated on the
Induction Cooktop.
• Cookware was
removed during cooking.
Replace cookware on
Cooktop.
E3 Incorrect Voltage Sensor
- Voltage over 150 V
• Make sure the outlet
used is 110/120 V AC.
E4 Incorrect Voltage Sensor
- Voltage below 80 V
• Make sure the outlet
used is 110/120 V AC.
Error Codes
To Next Page
Loading...
