Master Chef 810-0037 - Installation Final Checklist; Pre-Operation Checklist; Lighting Instructions; Preparing for Charcoal Lighting

Model No.: 810-0037 | SKU No. 0853187 | Contact Us: 1-855-803-9313
10
Installation Final Check List
Lighting Instructions
1. The cooking grill and charcoal grate are flat and resting in the proper position.
2. The ash catcher is properly mounted.
3. Vents can be turned smoothly.
4. Legs stand securely.
5. All packaging has been removed.
READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR GRILL.
1. Prepare the charcoal kettle for lighting.
2. Remove the lid and position it on the side of your charcoal kettle using the lid hook located on the inside of the lid.
3. Remove the cooking (top) grill from your charcoal grill.
4. Remove the charcoal (bottom) grate and clear ashes or chunks of old charcoal from the bottom of the bowl. Charcoal requires oxygen to
burn, so be sure that nothing clogs the vents.
5. Release the ash catcher, then dispose of the ashes.
6. Open the bowl vent by moving the handle to the open position.
7. Replace the charcoal (bottom) grate.