14
NATURAL GAS CONVERSION
CONVERSION INSTRUCTIONS:
Before the conversion, make sure all control knobs are in the OFF position, LP tank valve is
closed, and tank is disconnected from regulator and removed from grill.
1. Before the conversion, make sure all
control knobs are in the OFF position, LP
tank valve is closed, and tank is
disconnected from regulator and
removed from grill.
Next, open lid and remove warming rack,
grids and flame tamer.
2. Remove the R-pins at the back of
each main burner to detach them from
the bracket. Take the main burners out.
To Next Page
Loading...
Need help?
General
